Edge-Core ES4624-SFP Basic Management Manual page 364

[no] ipv6
<ipv6-address/prefix-length>
<valid-lifetime>
<preferred-lifetime>
[no-autoconfig]
（8）Configure static IPv6 neighbor Entries
Command
Interface Configuration Mode
ipv6 neighbor <ipv6-address>
<hardware-address> interface
<interface-type interface-name>
no ipv6 neighbor <ipv6-address>
（9）Delete all entries in IPv6 neighbor table
Command
Admin Mode
clear ipv6 neighbors
（10）Set the hoplimit of sending router advertisement
Command
Interface Configuration Mode
ipv6 nd ra-hoplimit <value>
（11）Set the mtu of sending router advertisement
Command
Interface Configuration Mode
ipv6 nd ra-mtu <value>
（12）Set the reachable-time of sending router advertisement
Command
Interface Configuration Mode
ipv6 nd
<seconds>
（13）Set the retrans-timer of sending router advertisement
Command
nd prefix
Configure
advertisement parameters of router. The NO
command cancels the address prefix of
[off-link]
routing advertisement.
Explanation
Set static neighbor table entries, including
neighbor IPv6 address, MAC address and
two-layer port
Delete neighbor table entries
Explanation
Clear all static neighbor table entries
Explanation
Set
advertisement.
Explanation
Set the mtu of sending router advertisement.
Explanation
Set the reachable-time of sending router
reachable-time
advertisement.
Explanation
364
the address
the hoplimit of
prefix and
sending router