Edge-Core ES4624-SFP Basic Management Manual page 614

Command
Global Mode
cluster ip-pool<commander-ip>
no cluster ip-pool
cluster commander [<cluster_name>]
no cluster commander
cluster member
<candidate-sn> | mac-address <mac-addr>
[id <member-id>]}
no cluster member {id <member-id> |
mac-address <mac-addr>}
3.Configure attributes of the cluster in the commander switch
Command
Global Mode
cluster auto-add
no cluster auto-add
cluster member auto-to-user
cluster keepalive interval <second>
no cluster keepalive interval
cluster keepalive loss-count <int>
no cluster keepalive loss-count
clear cluster
<candidate-sn-list>
<mac-addr>]
4. Configure attributes of the cluster in the candidate switch
Command
Global Mode
cluster keepalive interval <second>
no cluster keepalive interval
cluster keepalive loss-count <int>
no cluster keepalive loss-count
{candidate-sn
nodes [ nodes-sn
| mac-address
Explanation
Configure the private IP addressed
pool for cluster member devices
Create or delete a cluster
Add or remove a member switch
Explanation
Enable or disable adding newly
discovered candidate switch to the
cluster
Change automatically
members into manually added
ones
Set the keep-alive interval of the
cluster
Set the max number of lost
keep-alive messages that can be
tolerated in the cluster.
Clear nodes in the list of candidate
switches maintained by the switch
Explanation
Set the keep-alive interval of the
cluster
Set the max number of lost
keep-alive messages that can be
tolerated in the clusters
614
added