Edge-Core ES4624-SFP Basic Management Manual page 98

Switch(config)#rmon enable
Example 2: Disable RMON
Switch(config)#no rmon enable
2.6.5.2 show snmp
Command: show snmp
Function: Display all SNMP counter information.
Command mode: Admin Mode
Example:
Switch#show snmp
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 SNMP packets output
0 Too big errors (Max packet size 1500)
0 No such name errors
0 Bad values errors
0 General errors
0 Get-response PDUs
0 SNMP trap PDUs
Displayed information
snmp packets input
bad snmp version errors
unknown community name
illegal operation for community name
supplied
encoding errors
number of requested variable
Explanation
Total number of SNMP packet inputs.
Number of version information error
packets.
Number of community
packets.
Number of permission for community
name error packets.
Number of encoding error packets.
Number of variables requested by NMS.
98
name error