Edge-Core ES4624-SFP Basic Management Manual page 481
Hide thumbs
Also See for ES4624-SFP:
- Manual (932 pages) ,
- User manual (24 pages) ,
- Routing management manual (256 pages)
Table of Contents
Advertisement
Command：debug ip dhcp snooping event
no debug ip dhcp snooping event
Function： This command is use to enable the DHCP SNOOPING debug switch to debug
the state of DHCP SNOOPING task.
Command Mode：Admin mode.
Usage Guide: This command is mainly used to debug the state of DHCP SNOOPING
task and available of outputting the state of checking binding data and executing port
action and so on.
17.2.2.3 debug ip dhcp snooping packet
Command：debug ip dhcp snooping packet
no debug ip dhcp snooping packet
Function：This command is used to enable the DHCP SNOOPING debug switch to
debug the message-processing procedure of DHCP SNOOPING.
Command Mode：Admin mode.
Usage Guide ： the debug information that the DHCP SNOOPING is processing
messages, including every step in the message-processing procedure: adding alarm
information, adding binding information, transmitting DHCP messages and etc.
17.2.2.4 debug ip dhcp snooping packet interface
Command：debug ip dhcp snooping packet interface <ifName>
no debug ip dhcp snooping packet <ifName>
Function：This command is used to enable the DHCP SNOOPING debug switch to
debug the information that DHCP SNOOPING is receiving a packet.
Command Mode：Admin mode.
Usage Guide： the information that DHCP SNOOPING is receiving messages from a
specific port.
17.2.2.5 debug ip dhcp snooping update
Command：debug ip dhcp snooping update
no debug ip dhcp snooping update
Function：This command is use to enable the DHCP snooping debug switch to debug
the communication information between DHCP snooping and helper server.
Command Mode：Admin mode.
Usage Guide：Debug the information of communication messages received and sent by
DHCP snooping and helper server.
481
Advertisement
Table of Contents
Troubleshooting
