2. To enable DHCPv6 prefix delegation client function on port
Command
Interface Configuration Mode
ipv6 dhcp client pd <prefix-name>
[rapid-commit]
no ipv6 dhcp client pd
15.6 DHCPv6 Configuration Command
15.6.1 clear ipv6 dhcp binding
Command: clear ipv6 dhcp binding [<ipv6-address>][pd <ipv6-prefix/prefix-length>]
Function: To clear one specified DHCPv6 assigned address or prefix binding record or
all the IPv6 address and prefix binding records.
Parameter: <ipv6-address> is the specified IPv6 address with binding record;
<ipv6-prefix/prefix-length> is the specified IPv6 prefix with binding record.To clear all
IPv6 address and prefix binding record if there is no specified record.
Command Mode: Admin Mode.
Usage Guide: DHCPv6 IPv6 address and prefix binding information can be displayed
through the command show ipv6 dhcp binding. If DHCPv6 client doesnot use the
DHCPv6 allocated IPv6 address and prefix but when the life time of the IPv6 address
doesnot end, the DHCPv6 server will not remove its bind for this address and prefix. In
this situation, the address and prefix binding information can be removed manually
though this command. And if no parameter is appended, this command will remove all
the address and prefix binding information.
Example: To delete all binding record of IPv6 address and prefix.
Switch#clear ipv6 dhcp binding
Relative Command:show ipv6 dhcp binding
15.6.2 clear ipv6 dhcp server statistics
Command:clear ipv6 dhcp server statistics
Function: To delete the statistics of DHCPv6 Server, and reset DHCPv6 server counter.
Parameter: None.
Notes
To enable client prefix delegation request
function on specified port, and the prefix
obtained associate with universal prefix
configured.
440