Edge-Core ES4624-SFP Basic Management Manual page 88

Hide thumbs Also See for ES4624-SFP:
Table of Contents

Advertisement

Parameter: <protocol-type> is the type of the protocol, including dot1x, stp, snmp, arp,
telnet, http, dhcp, igmp, ssh, bgp, bgp4plus, rip, ripng, ospf, ospfv3, pim, pimv6,
unknown-mcast, unknow-mcast6, mld. <packets> is the max rate of CPU receiving
packets of the protocol type, its range is <1-2000> pps.
Command Mode: Global Mode
Default: A different default rate is set for the different type of protocol.
Usage Guide: The rate limit set by this command have an effect on CPU receiving
packets, so it is supposed to be used with the help of the technical support.
Example:Set the rate of the CPU receiving the arp packets to 500pps
Switch(config)#cpu-rx-ratelimit protocol arp 500
2.4.3.4 clear cpu-rx-stat protocol
Command: clear cpu-rx-stat protocol [<protocol-type>]
Function: Clear the statistics of the CPU received packets of the protocol type.
Parameter: <protocol- type> is the type of the protocol of the packet, including dot1x,
stp, snmp, arp, telnet, http, dhcp, igmp, ssh, bgp, bgp4plus, rip, ripng, ospf, ospfv3, pim,
pimv6, unknown-mcast,unknow-mcast6 and mld.
Command Mode: Global Mode
Usage Guide: This command clear the statistics of the CPU received packets of the
protocol type, it is supposed to be used with the help of the technical support.
Example: Clear the statistics of the CPU receives arp packets.
Switch(config)#clear cpu-rx-stat protocol arp
2.4.3.5 show cpu-rx protocol
Command: show cpu-rx protocol [<protocol-type>]
Function: Show the statistics of the CPU received packets of the protocol type.
Parameter: <protocol- type> is the type of the protocol of the packet.
Command Mode:Admin and configuration mode
Default: None.
Usage Guide:This command is used to debug, it is supposed to be used with the help of
the technical support.
Example:show the statistics of the CPU receiving arp packets
Switch#show cpu-rx protocol arp
Type
arp
2.4.3.6 debug driver
Command: debug driver {receive|send} [interface {<interface-name> |all}] [protocol
Rate-limit
TotPkts
500
3
CurState
allowed
88

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es4626-sfp

Table of Contents