Action Log - Siemens SINUMERIK 808D ADVANCED Diagnostic Manual

Operating in the system data management operating area
3.8 Viewing the service info
①
②
③
④
⑤
3.8.1

Action log

Overview
The action log function is provided for recording the service events on the PPU. You can view
or save the action log as desired.
Viewing the action log
34
Displays information of the axes.
Displays information of the drives.
Displays the action log for service events, provides the possibility of sending service mes‐
sages, and configures the Ethernet connection.
Compares the defined machine data with the actual data, and adjust the parameters if
necessary. Refer to Section "Servo trace (Page 37)" for more information.
Displays the version numbers and the date of creation of the individual CNC components.
Refer to Section "Version/HMI details (Page 39)" for more information.
1. Select the desired operating area.
+
2. Press this key to view the extended softkeys.
3. Open the action log window through the following softkey operations:
→ →
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
Diagnostics Manual