Siemens SINUMERIK 808D ADVANCED Diagnostic Manual page 350

SINUMERIK 808D ADVANCED alarms
5.2 NCK alarms
Reaction: NC not ready.
The NC switches to follow-up mode.
Mode group not ready, also effective for single axes.
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Repeat entry with correct value and then Power On.
Programm Switch control OFF - ON.
continuation:
26015 Axis %1 machine data %2[%3] invalid value
Parameters: %1 = Axis name, spindle number
%2 = String: MD identifier
%3 = Index: MD array index
Explanation: Machine data includes a value that is not valid.
Reaction: NC not ready.
The NC switches to follow-up mode.
Mode group not ready, also effective for single axes.
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Repeat entry with correct value and then Power On.
Programm Switch control OFF - ON.
continuation:
26016 Axis %1 machine data %2 invalid value
Parameters: %1 = Axis name, spindle number
%2 = String: MD identifier
Explanation: Machine data includes a value that is not valid.
Reaction: NC not ready.
The NC switches to follow-up mode.
Mode group not ready, also effective for single axes.
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Repeat entry with correct value and then Reset.
Programm Restart part program.
continuation:
26017 Axis %1 machine data %2[%3] invalid value
Parameters: %1 = Axis name, spindle number
%2 = String: MD identifier
%3 = Index: MD array
Explanation: Machine data includes a value that is not valid.
350
Clear alarm with the RESET key in all channels of this mode group. Restart part program.
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
Diagnostics Manual