Siemens SINUMERIK 808D ADVANCED Diagnostic Manual page 94

SINUMERIK 808D ADVANCED alarms
5.2 NCK alarms
Remedy: Execute NCK Power On and enter the license key (correctly).
Programm Clear alarm with the Delete key or NC START.
continuation:
8083 Export-restricted system software without valid licensing.
Explanation: A special CompactFlash Card and a special license key are required for operating the export-restricted system software.
Reaction: Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy: Please ensure that a corresponding CompactFlash Card is available in the controller. Generate a license key for export-
restricted system software via the internet under http://www.siemens.com/automation/license and enter in the license key
under "Start-up" operating area function (HSK) "Licenses".
Programm Switch control OFF - ON.
continuation:
8084 Period %1 of the test license active remaining time %2 h
Explanation: A test period has been started. During this period, one or several options can be set, which require a license key to prove
that they have been purchased
A maximum of 6 test periods are possible, one test period can be a maximum of 150h operating time of the control system
Reaction: Alarm display.
Remedy: Generate a new license key through the Internet at http://www.siemens.com/automation/license and enter in the operating
area "Startup", function (HSK) "Licenses".
Enter a valid license key in the operating area "Startup", function (HSK) "Licenses".
Programm Clear alarm with the Delete key or NC START.
continuation:
8085 %1. Test license period has expired
Explanation: A test period has expired.
A maximum of 6 test periods are possible, a test period can be a maximum of 150h operating time of the control system
Reaction: Alarm display.
Remedy: Generate a new license key via the Internet at http://www.siemens.com/automation/license and enter in the operating area
"Startup", function (HSK) "Licenses".
Enter a valid license key in the operating area "Startup", function (HSK) "Licenses".
Activate an additional test period
Reset the options that require a license key
Programm Clear alarm with the Delete key or NC START.
continuation:
8086 Test and demonstration machine
Explanation: This controller is operated with a test license for testing and demonstration purposes.
For licensing reasons, you may not use this machine in the productive process.
Reaction: Alarm display.
Remedy: Generate a new license key through the Internet at http://www.siemens.com/automation/license and enter in the operating
area "Startup", function (HSK) "Licenses".
Enter a valid license key in the operating area "Startup", function (HSK) "Licenses".
Programm Clear alarm with the Delete key or NC START.
continuation:
8089 The function 'Select tool offsets' is not possible
Explanation: The current options do not permit a tool offset.
94
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
Diagnostics Manual