Siemens SINUMERIK 808D ADVANCED Diagnostic Manual page 254

SINUMERIK 808D ADVANCED alarms
5.2 NCK alarms
Reaction: NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Modify part program.
Programm Clear alarm with NC START or RESET key and continue the program.
continuation:
16770 [Channel %1: ] Block %2 axis %3 no measuring system available
Parameters: %1 = Channel number
%2 = Block number, label
%3 = Axis name, spindle number
Explanation: One of the following spindle functions has been programmed, the position control requires:
SPCON,
SPOS, SPOSA,
COUPON,
G331/G332.
The position control requires at least one measuring system.
No measuring system has been configured in MD30200 $MA_NUM_ENCS of the programmed spindle.
Reaction: Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy: Please inform the authorized personnel/service department. Retrofit a measuring system.
Programm Clear alarm with the RESET key. Restart part program
continuation:
16775 [Channel %1: ] Block %2 motion synchronous action: %3 axis %4 no measuring system available
Parameters: %1 = Channel number
%2 = Block number, line number
%3 = Synact ID
%4 = Axis name, spindle number
Explanation: One of the following spindle functions has been programmed, the position control requires:
SPCON,
SPOS, SPOSA,
COUPON,
G331/G332.
The position control requires at least one measuring system.
No measuring system has been configured in MD30200 $MA_NUM_ENCS of the programmed spindle.
Reaction: NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Please inform the authorized personnel/service department. Retrofit a measuring system.
Programm Clear alarm with the RESET key. Restart part program
continuation:
16794 [Channel %1: ] Block %2 coupling of axis/spindle %3 prohibits reference point approach
Parameters: %1 = Channel number
%2 = Block number, label
%3 = Axis name, spindle number
254
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
Diagnostics Manual