Action In The Event Of A System Or Component Malfunction; Maintenance And Repair - Siemens L-828 Manual

L-828 CCRs LC-Type (4, 7.5, and 10 kW/6.6 A/60 Hz)
7. Action in the Event of a
System or Component
Malfunction

8. Maintenance and Repair

 2002 Siemens Airfield Solutions, Incorporated
All rights reserved
Do not operate a system that contains malfunctioning components.
If a component malfunctions, turn the system OFF immediately.
•
Disconnect and lock out electrical power.
• Allow only qualified personnel to make repairs. Repair or replace
the malfunctioning component according to instructions
provided in its manual.
Allow only qualified personnel to perform maintenance,
troubleshooting, and repair tasks. Only persons who are properly
trained and familiar with Siemens Airfield Solutions equipment are
permitted to service this equipment.
•
Always use safety devices when working on this equipment.
• Follow the recommended maintenance procedures in your
equipment manuals.
•
Do not service or adjust any equipment unless another person
trained in first aid and CPR is present.
•
Connect all disconnected equipment ground cables and wires
after servicing equipment. Ground all conductive equipment.
• Use only approved Siemens Airfield Solutions replacement parts.
Using unapproved parts or making unapproved modifications to
equipment may void agency approvals and create safety hazards.
•
Check interlock systems periodically to ensure their effectiveness.
•
Do not attempt to service electrical equipment if standing water
is present. Use caution when servicing electrical equipment in a
high-humidity environment.
•
Use tools with insulated handles when working with electrical
equipment.
96A0104B
Issued 6/02
Safety
Page 1-5