Siemens SINUMERIK 808D ADVANCED Diagnostic Manual page 192

SINUMERIK 808D ADVANCED alarms
5.2 NCK alarms
Explanation: A function has been programmed or triggered which is not permitted in the current program context. The function in question
is encoded in the "index" parameter:
Index == 1: "RET" command was programmed in the main program level
Index == 2: Conflict between "Cancel level"/"Clear number of passes" and "Implicit GET"
Index == 3: Conflict ASUB start immediately after selection of overstore (up to P3)
Index == 4: MD10760 $MN_G53_TOOLCORR = 1 : SUPA/G153/G53 programmed in G75
Index == 5: POSRANGE command not programmed in synchronized action
Index == 6: SIRELAY command not programmed in synchronized action
Index == 7: GOTOF/GOTOB/GOTO command programmed with string variable in synchronized action.
Index == 8: COA application "Cutting generator" not active
Index == 9: Tool radius compensation active in G75
Index == 10: Number of return levels too big, with RET (...xy) across several program levels
Index == 11: The function is not implemented for this variable
Reaction: Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy: Index == 1: Substitute "RET" command with M17/M30
Index == 2: Insert an auxiliary block (e.g. M99) after the subroutine call to which the "Cancel level"/"Clear number of passes"
refers
Index == 3: Overstore an auxiliary block (e.g. M99), then start ASUB (up to P3)
Index == 4: With MD10760 $MN_G53_TOOLCORR = 1: Do not activate SUPA/G53/G153 in the G75 block
Index == 5: Program POSRANGE command in synchronized action
Index == 6: Program SIRELAY command in synchronized action
Index == 7: Program GOTOF/GOTOB/GOTO command with block number or label
Index == 8: Load COA application "Cutting generator"
Index == 9: Tool radius compensation active in G75
Programm Clear alarm with the RESET key. Restart part program
continuation:
14092 [Channel %1: ] Block %2 axis %3 is wrong axis type
Parameters: %1 = Channel number
%2 = Block number, label
%3 = Axis name, spindle number
192
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
Diagnostics Manual