Siemens SINUMERIK 808D ADVANCED Diagnostic Manual page 19

Diagnostics Manual
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
Operating in the system data management operating area
3.3 Setting both system machine data and setting data
Axis-specific machine data
Drive machine data
Display machine data. This softkey is available on the extended hori‐
zontal softkey bar which can be accessed via the following key:
3. Locate the machine data which you desire to set.
You can also search for an MD using the following softkeys:
Searches for the desired number or the name (or a part of the name)
of the machine data
Continues searching for the next match
4. Enter the desired value in the blank and press this key to confirm.
5. Press this softkey to activate the modified value(s) after you finish set‐
ting the machine data.
Further softkey operations are available for setting the machine data:
Resets the value of the selected MD to default
Undoes the modified values and recalls the lastly used values
Provides various display filters for the active machine data group
For the axis-specific machine data, two additional softkeys are also
provided:
Switches among available axes/spindle
19