Editing String Values; Editing Enumerated Values; Changing Time Settings In Lhmi - ABB RELION REL650 Operation Manual

Section 4
Using the HMI
4.1.9.2

Editing string values

1. Activate the setting mode and select a setting.
When editing string values, the cursor moves to the first character.
2.
Press
An on-screen keyboard is shown on the HMI.
IEC15000062 V1 EN-US
Editing can be aborted at any time by pressing
on-screen keyboard.
3.
Press
IEC15000063 V1 EN-US
4. Edit the string using the on-screen keyboard.
5.
Select OK on the on-screen keyboard or press
to accept the entered string is accepted and the editing dialog is closed.
4.1.9.3

Editing enumerated values

1. Activate the setting mode and select a setting.
When editing an enumerated value, the selected value is shown inverted.
2.
Press
One press changes the enumerated value by one step in the parameter specific order.
4.1.9.4

Changing time settings in LHMI

If there is a need to change the time setting in the LHMI (Main menu/Configuration/Time/
System time/SYSTEMTIME:1) the change will take affect immediately. To confirm the new
setting press
24
Unicode characters that are not found on the on-screen keyboard can be used
if the string is edited in PCM600. This string can be shown and edited on the
HMI but if a character that is not found on the on-screen keyboard is deleted it
cannot be retrieved using the HMI.
to open the editor.
or to select the edited string and press
or to change the value of an active enumerated value.
. To remove the change, press
IEC15000062.vsdx
or by using the Cancel button on the
or to move the cursor.
IEC15000063.vsdx
while the string editing field is focused
.
1MRK 500 125-UEN A
AMU0600416 v9
AMU0600417 v6
GUID-0EE1EA01-D75F-4F3E-825F-ACD59D5A160F v3
Operation manual