Debugging Physical Mgf; Display Hardware Internal Physical Mgf Debugging - H3C MSR Series Probe Command Reference

chip-num: Specifies the chip number in the range of 0 to 31.

debugging physical mgf

Use debugging physical mgf to enable debugging for the forwarding card.
Use undo debugging physical mgf to disable debugging for the forwarding card.
Syntax
debugging physical mgf { all | error | event | packet }
undo debugging physical mgf { all | error | event | packet }
Default
Debugging for the forwarding card is disabled.
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
all: Specifies all types of debugging.
error: Specifies error debugging.
event: Specifies event debugging.
packet: Specifies packet debugging.
Usage guidelines
Outputting the debugging information affects system operation efficiency. When you diagnose a fault,
use this command to enable the specified debugging, rather than all types of debugging.

display hardware internal physical mgf debugging

Use display hardware internal physical mgf debugging to display the enabled MGF debugging.
Syntax
display hardware internal physical mgf debugging
Views
Probe view
Predefined user roles
network-admin
network-operator
7