Brocade Communications Systems WFT-2D User Manual page 90

3
SAN discovery overview
2. Click Add to specify the IP addresses of the devices you want to discover.
3. Enter a name for the fabric in the Fabric Name field.
4. Enter an IP address (IPv4 or IPv6) for a device in the IP Address field.
38
FIGURE 8
Discover Fabrics dialog box
The Add Fabric Discovery dialog box displays.
FIGURE 9 Add Fabric Discovery dialog box (IP Address tab)
To configure the preferred IP format for the Management application server to connect with
Fabric OS devices, refer to
has both an IPv4 and IPv6 address, the Management server uses the preferred address. If a
product does not have the preferred address type, the Management server uses the other IP
type.
For seed switch requirements, refer to
"Configuring the preferred IP format"
"Seed switch requirements"
on page 125. If the product
on page 54.
Brocade Network Advisor SAN User Manual
53-1003154-01