3. Select one of the following options.
4. Click OK on the Duplicated Names dialog box.
5. Click OK to close the Configure Names dialog box.
6. Click OK on the confirmation message.
Viewing names
To view names associated with devices, complete the following steps.
1. Select Configure > Names.
FIGURE 30
2. Select All Names from the Display list.
Brocade Network Advisor SAN User Manual
53-1002696-01
Operational Status — The operational status of the device. There are four possible
values:
-
Up — Operation is normal.
-
Down — The port is down or the route to the remote destination is disabled.
-
Disabled — The connection has been manually disabled.
-
Backup Active — The backup TCP port is active due to a failover.
Port # — The port number.
Type — The type of device.
•
If you select Append Incremental numbers for all repetitive names, the names are edited
automatically using incremental numbering.
•
If you select I will fix them myself, edit the name in the Name field.
The Configure Names dialog box displays
Configure Names dialog box
Only devices with a name display. The table displays the following information.
SAN name settings
(Figure
30).
5
95