Troubleshooting discovery
If you encounter discovery problems, complete the following checklist to ensure that discovery was
set up correctly.
1. Verify IP connectivity by issuing a ping command to the switch.
2. Enter the IP address of the device in a browser to verify the SNMP settings.
M-EOSn discovery troubleshooting
The following section states a possible issue and the recommended solution for M-EOSn discovery
errors.
DCFM Professional Plus User Manual
53-1001774-01
a. Open the command prompt.
b. From the Server, type
For example, http://10.1.1.11.
ping
Switch_IP_Address
.
2
49