Show Running-Config - Dell Force10 S4810P Reference Manual

runtime 7.5.1.0 control processor passed
runtime 7.5.1.0 route processor passed
runtime 7.5.1.0 terascale linecard passed
boot flash 2.4.1.1 control processor passed
boot flash 2.4.1.1 route processor passed
boot flash 2.3.1.3 terascale linecard passed
boot selector 2.4.1.1 control processor passed
boot selector 2.4.1.1 route processor passed
boot selector 2.3.1.3 terascale linecard passed
FTOS#
Example (C-
FTOS#show os-version
Series)
RELEASE IMAGE INFORMATION :
-------------------------------------------------
Platform Version Size ReleaseTime
C-series: CB 7.5.1.0 23734363 Aug 18 2007 11:49:51
TARGET IMAGE INFORMATION :
--------------------------------------------------
Type Version Target checksum
runtime 7.5.1.0 control processor passed
runtime 7.5.1.0 linecard passed
boot flash 2.7.0.1 control processor passed
boot flash 1.0.0.40 linecard passed
boot selector 2.7.0.1 control processor passed
boot selector 1.0.0.40 linecard passed
FPGA IMAGE INFORMATION :
--------------------------------------------------
Card Version Release Date
Primary RPM 4.1 May 02 2007
Secondary RPM 4.1 May 02 2007
LC0 3.2 May 02 2007
LC5 3.2 May 02 2007
LC6 2.2 May 02 2007
FTOS#

show running-config

Display the current configuration and display changes from the default values.
C-Series, E-Series, S-Series, Z-Series
Syntax show running-config [entity] [configured] [status]
Parameters
entity (OPTIONAL) Enter one of the keywords listed below to display that
entity's current (non-default) configuration:
NOTE: If nothing is configured for that entity, nothing is displayed
and the prompt returns.
aaa for the current AAA configuration
acl for the current ACL configuration
arp for the current static ARP configuration
as-path for the current AS-path configuration
85