Hostname; Ip Ftp Password - Dell Force10 S4810P Reference Manual

hostname

Set the host name of the system.
C-Series, E-Series, S-Series, Z-Series
Syntax hostname name
Parameters
name
Defaults FTOS
Command Modes CONFIGURATION
Command History
Version 8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage The hostname is used in the prompt.
Information

ip ftp password

Specify a password for outgoing FTP connections.
C-Series, E-Series, S-Series, Z-Series
Syntax ip ftp password [encryption-type] password
To remove a password and return to the default setting, use the no ip ftp password
[password] command.
Parameters
encryption-type
password
Defaults Not configured.
Command Modes CONFIGURATION
Enter a text string, up to 32 characters long.
Changed the default from Force10 to FTOS.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
(OPTIONAL) Enter one of the following numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
Enter a string up to 40 characters as the password.
123