Ip Ftp Source-Interface - Dell Force10 S4810P Reference Manual

Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage The password is listed in the configuration file; you can view the password by entering the
Information show running-config ftp command.
The password configured by the ip ftp password command is used when you use the
ftp: parameter in the copy command.
Related
copy
Commands
ip ftp username

ip ftp source-interface

Specify an interface's IP address as the source IP address for FTP connections.
C-Series, E-Series, S-Series, Z-Series
Syntax ip ftp source-interface interface
To delete an interface, use the no ip ftp source-interface interface
command.
Parameters
interface
124
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
– copy files.
– sets the user name for the FTP sessions.
Enter the following keywords and slot/port or number information:
•
•
•
•
•
•
•
For an 100/1000 Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For Loopback interfaces, enter the keyword loopback
followed by a number from zero (0) to 16383.
For a Port Channel interface, enter the keyword port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
For SONET interface types, enter the keyword sonet
followed by the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.