Avaya Communication Manager Administrator's Manual page 1120

Screen Reference
DC
This field assigns a dial code to an extension. The dial code is the code users must dial to make
intercom calls to the corresponding extension.
Valid entries
1 or 2-digit code
Ext
This field assigns an extension to the group.
Valid entries
an extension
number
Group Number
This display-only field shows the group's ID number.
Length of Dial Code
This field sets the number of digits that users must dial to access an extension in the group. (On
Page 2, this is a display-only field.
Valid entries
1
2
Name
Display-only field. The server running Communication Manager fills in this field with the name
from the Station screen.
1120 Administrator Guide for Avaya Communication Manager
Usage
The number of digits entered must exactly match the number assigned in
the Length of Dial Code field. For example, if the Length of Dial Code
field is set to 2, you must type 1 as 01 in the DC field. This field cannot be
blank.
Usage
Enter a physical extension number. You cannot enter a VDN in this field.
Usage
Enter 1 if there are 9 or fewer members.
Enter 2 if there are 10 or more members.