Avaya Communication Manager Administrator's Manual page 1107

Second Announcement Extension
Appears only when the ACD and Queue fields both are y and the Vector field is n.
Note:
If entering a Multi-Location Dial Plan shortened extension, note the following:
Note:
When entering a Multi-Location Dial Plan shortened extension in a field designed
for announcement extensions, certain administration end validations that are
normally performed on announcement extensions are not done, and resultant
warnings or submittal denials do not occur. The shortened extensions also do not
appear in any display or list that shows announcement extensions. Extra care
should be taken to administer the correct type of announcement for the
application when assigning shortened extensions.
Valid entries
Valid extension
blank
Second Announcement Delay (sec)
Appears only when the ACD and Queue fields both are y and the Vector field is n. Enter the
time in seconds before the call in the queue receives a second recorded announcement or that
the second announcement is repeated.
Valid entries
1 to 99
blank
Second Announcement Recurring
Appears only when the ACD and Queue fields both are y and the Vector field is n.
Valid entries
y
blank
Usage
Enter the extension number assigned to a recorded announcement.
Leaving the field blank indicates there is no second announcement.
Usage
Avaya recommends that, if this split/skill or hunt group is a coverage point
for another split/skill, this delay should not be more than 15 seconds.
Leave blank if there is no second announcement.
Usage
The second announcement can be repeated.
Leave blank if there is no second announcement.
Hunt Group
Issue 2.1 May 2006 1107