Ip Http Server - Dell PowerConnect 8024 Cli Reference Manual

Default Configuration
This default port number is 80.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines. However, specifying 0 as the port number effectively
disables HTTP access to the switch.
Example
The following example shows how the http port number is configured to 100.
console(config)#ip http port 100

ip http server

Use the ip http server command in Global Configuration mode to enable the switch to be
configured, monitored, or modified from a browser. To disable this function use the no form of
this command.
Syntax
ip http server
no ip http server
Default Configuration
The default mode is enabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables the switch to be configured from a browser.
console(config)#ip http server
1123
Web Server Commands