Dell PowerConnect 8024 Cli Reference Manual page 1120

Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Use this command to enter an external certificate (signed by the Certification Authority) to the
switch. To end the session, add a period (.) on a separate line after the input, and press ENTER.
The imported certificate must be based on a certificate request created by the crypto certificate
request privileged EXEC command.
If the public key found in the certificate does not match the switch's SSL RSA key, the
command fails.
This command is not saved in the router configuration; however, the certificate imported by this
command is saved in the private configuration (which is never displayed to the user or backed
up to another switch).
Example
The following example imports a certificate sighed by the Certification Authority for HTTPS.
console(config)#crypto certificate 1 import
-----BEGIN CERTIFICATE-----
dHmUgUm9vdCBDZXJ0aWZpZXIwXDANBgkqhkiG9w0BAQEFAANLADBIAkEAp4HS
nnH/xQSGA2ffkRBwU2XIxb7n8VPsTm1xyJ1t11a1GaqchfMqqe0kmfhcoHSWr
yf1FpD0MWOTgDAwIDAQABo4IBojCCAZ4wEwYJKwYBBAGCNxQCBAYeBABDAEEw
CwR0PBAQDAgFGMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYEFAf4MT9BRD47
ZvKBAEL9Ggp+6MIIBNgYDVR0fBIIBLTCCASkwgdKggc+ggcyGgclsZGFwOi8v
L0VByb3h5JTIwU29mdHdhcmUlMjBSb290JTIwQ2VydGlmaWVyLENOPXNlcnZl
-----END CERTIFICATE-----
Certificate imported successfully.
Issued to: router.gm.com
Issued by: www.verisign.com
Valid from: 8/9/2005 to 8/9/2005
Subject: CN= router.gm.com, 0= General Motors, C= US
1120
Web Server Commands