Technical Specifications - Honeywell SYA14 Series Manual

3.5 Technical specifications

Safety class
Protective device
Laser
FF-SE characteristics
Measuring and alarm zone
Detection and safety zone*
Response time in detection zone
Max. viewing angle
Laser and angle measurements
Infrared laser diode
Wavelength
Laser protection class
laser diode, pulse frequency
Head rotation frequency
Scan angle
Resolution
Lens
Coaxial emitter and receiver lens
Laser beam divergence
Focal distance
Lens diameter
Power supply voltage
Power supply
Current consumption
In rush at start-up
Total Power consumption
Housing
Material
Sealing
Length
Width
Height
Weight
Operating temperature
Storage temperature
Interface
Interface type
Relay outputs for
ALARM
SAFETY
Cable plug connections
"Serial interface" connection
"24 Vdc/Signal" connection
*Target to be detected: Dark cylinder, 70 mm diameter and 1.8% reflectivity.
19
Category 3 according to EN 954-1
Tested according to EN 61496-1
IEC 825, infrared laser class 1 (eye-safe)
0 to 10 m (0 to 32.80 ft)
0 to 6 m (including safety margin) (0 to 19.68 ft)
280 ms
300°
905 nm
1 (IEC 825)
5.76 kHz, ±5 %
8 Hz, + 5 %
300°
0.5°
15 mrad. (0.9°)
30 mm (1.18 in)
30 mm (1.18 in)
24 Vdc ± 15% (galvanic insulation with transformer
according to IEC 742); for applications powered by
battery, a DC/DC converter with an input voltage of 24
V ± 30% must be used (see 5.4)
approx. 1 A at 24 Vdc
2A during 100 ms
24 W
Aluminium
IP 65 NEMA 4, 13
172 mm (6.62 in)
112 mm (4.25 in)
176 mm (6.93 in)
approx. 3 kg (6.61 lbs.)
0 to 50°C (32 to 122°F)
-20 to +70°C (-4 to 158°F)
RS 232
9600 baud
8 data bits, 1 stop bit
no parity
insulated relay output
1 Normally Open output contact (max. 2 A / 48 V) DC
2 Normally Open output contacts (max. 2 A / 48 V) DC
resistive load, electrical life: 2 millions operations,
specification for the output contacts of the safety relay
: 10V / 10 mA
14-pin BINDER plug
8-pin BINDER plug
107006-11 EN FR26 GLO 0300 Printed in Germany