Table of Contents
Advertisement
Dual Channel Emergency Stop Module
IMPROPER INSTALLATION
• Consult with US and/or European safety agencies
and their requirements when designing a machine
control, interface and all control elements that
affect safety.
• Strictly adhere to all installation instructions.
Failure to comply with these instructions could
result in death or serious injury.
PRODUCT DESCRIPTION
The FF-SRS5988 Emergency Stop modules are
designed to be used in emergency stop circuits
when danger to personnel or machinery is present.
This device, offering six NO and one NC closed
contact, has two internal safety relays with positive-
guided contacts to ensure redundancy.
This
safety
control
emergency stop signal to the machine control
circuitry. FF-SRS5988 helps to create a control
reliable safety solution by providing redundancy and
self-checking circuitry. Other features include high
current capability, a great number of contacts as
well as an automatic or manual start mode, cross
fault monitoring, and external relays monitoring.
APPROVALS
CE
The
product,
documentation of FF-SR Series
products carry the CE mark,
following the examination by BG
(German Berufsgenossenschaft
E+MIII). The CE declaration of
conformity
request.
cULus
This product is pending approval
(pending)
by Underwriters Laboratories Inc.
according to Canadian and U.S.
safety requirements.
FF-SRS5988
Instructions for use
module
provides
an
packaging
and
is
available
upon
(pending)
DIRECTIVES COMPLIANCE
Machine Directive 89/392 EEC
Low Voltage Directive 73/23 EEC
Electromagnetic Compatibility Directive 89/336
REGULATIONS COMPLIANCE
Regulation
Title
OSHA 29 CFR
General Requirements for
1910.212
(guarding of) All Machines
OSHA 29 CFR
(Guarding
1910.217
Power Presses
STANDARDS COMPLIANCE
Standard
Title
EN 292
Safety of Machinery - Basic
Concepts, General Principles
for Design
EN 60204-1
Safety
Electrical
Machines
EN 954-1
Safety of Machinery - Safety
related
system
ANSI B11.1
Mechanical Power Presses
ANSI B11.2
Hydraulic Power Presses
ANSI B11.19
Safeguarding
Referenced by the Other
B11 Machine Tool Safety
Standards
ANSI/RIA R15.06
Safety
Industrial Robots and Robot
Systems
UL508
Underwriters Laboratories
107018-04 EN FR26 GLO 1198 Printed in Germany
of)
Mechanical
of
Machinery
-
Equipment
of
parts
of
control
when
Requirements
for
Advertisement
Chapters
Table of Contents
Troubleshooting
