Honeywell SYA14 Series Manual page 673

IMPROPER INSTALLATION
• Consult with US and/or European safety agencies and
their requirements when designing a machine control,
interface and all control elements that affect safety.
• Strictly adhere to all installation instructions.
Failure to comply with these instructions could result
in death or serious injury.
PRODUCT DESCRIPTION
The FF-SRS5934 Emergency
designed to be used in emergency stop circuits when
danger to personnel or machinery is present. This device
has two safety relays with positive-guided contacts to
ensure redundancy.
This safety control module
information to the machine control circuitry. It allows
higher current capability, higher number of contacts, and
additional features versus a regular safety sensors
(automatic or manual start mode, external relays
monitoring).
The FF-SRS5934 is a single channel device and relies on
a single safety input. If a single safety input does not
provide the level of safety required, use one of the dual
channel safety control modules (FF-SRS5925, FF-
SRS5935, FF-SRS5988).
APPROVALS
CE The product, packaging and
documentation of FF-SR Series
products carry the CE mark; the CE
declaration of conformity is available
upon request.
cULus This
Underwriters
according to Canadian and U.S.
safety requirements.
BG German Berufsgenossenschaft
E+MIII
107016-11 EN FR26 GLO 1199 Printed in Germany
FF-SRS5934
Single Channel Emergency Stop Module
Instructions for use
Stop modules
relays the stopping
product is approved
Laboratories
are
DIRECTIVES COMPLIANCE
Machine Directive 98/37 EEC
Low Voltage Directive 73/23 EEC
Electromagnetic Compatibility Directive 89/336
REGULATIONS COMPLIANCE
Regulation
OSHA 29 CFR
1910.212
OSHA 29 CFR
1910.217
STANDARDS COMPLIANCE
Standard
ANSI B11.1
ANSI B11.2
ANSI B11.19
by
Inc.
ANSI/RIA R15.06
UL508
EN 292
EN 60204
EN 954
Title
General Requirements for
(guarding of) All Machines
(Guarding of) Mechanical
Power Presses
Title
Mechanical Power Presses
Hydraulic Power Presses
Safeguarding when Referenced
by the Other B11 Machine Tool
Safety Standards
Safety Requirements for
Industrial Robots and Robot
Systems
Underwriters Laboratories
Safety of Machinery - Basic
Concepts, General Principles
for Design
Safety of Machinery - Electrical
Equipment of Machines
Safety of Machinery - Safety
related parts of control system
1