Table of Contents
Advertisement
IMPROPER INSTALLATION
• Consult with US and/or European safety agencies
and their requirements when designing a machine
control, interface and all control elements that
affect safety.
• Strictly adhere to all installation instructions.
Failure to comply with these instructions could
result in death or serious injury.
PRODUCT DESCRIPTION
The FF-SRS5924 Emergency Stop control modules
are designed to be used in emergency stop circuits
when danger to personnel or machinery is present.
This device has two internal safety relays with
positive-guided contacts to ensure redundancy in its
output circuit.
This safety control module relays the stopping
information to the machine control circuitry. It allows
high number of contacts and additional features like
an automatic or manual start mode and external
relay monitoring.
Its slim housing of only 22.5 mm (0.89 in.) width
allows this Safety control module to fit into every
cabinet or even helps to reduce the overall cabinet
size.
The FF-SRS5924 is a single channel device and
relies on a single safety input. If a single safety input
does not provide the level of safety required, use
one of the dual channel safety control modules (FF-
SRS5925, FF-SRS5935, FF-SRS5988).
APPROVALS
CE
The
product,
documentation of FF-SR Series
products carry the CE mark,
following the examination by BG
(German Berufsgenossenschaft
E+MIII). The CE declaration of
conformity
request.
cULus
This product is pending approval
(pending)
by Underwriters Laboratories Inc.
according to Canadian and U.S.
safety requirements.
107015-10 EN FR26 GLO 1198 Printed in Germany
FF-SRS5924
Single Channel
Emergency Stop Module
Instructions for use
(pending)
packaging
and
is
available
upon
DIRECTIVES COMPLIANCE
Machine Directive 98/37/EEC
Low Voltage Directive 73/23 EEC
Electromagnetic Compatibility Directive 89/336
REGULATIONS COMPLIANCE
Regulation
Title
OSHA 29 CFR
General Requirements for
1910.212
(guarding of) All Machines
STANDARDS COMPLIANCE
Standard
Title
EN 292
Safety of Machinery - Basic
Concepts, General Principles
for Design
EN 60204-1
Safety
Electrical
Machines
EN 954-1
Safety of Machinery - Safety
related
system
ANSI B11.19
Safeguarding
Referenced by the Other
B11 Machine Tool Safety
Standards
ANSI/RIA R15.06
Safety
Industrial Robots and Robot
Systems
UL508
Underwriters Laboratories
of
Machinery
-
Equipment
of
parts
of
control
when
Requirements
for
1
Advertisement
Chapters
Table of Contents
Troubleshooting
