Specifications - Honeywell SYA14 Series Manual

Specifications

OPERATING CHARACTERISTICS
Scanning Range
Object Detection Size
Angle of Divergence
Emitting Light Source
Immunity to Ambient Light
ELECTRICAL CHARACTERISTICS
Supply Voltage (emitter or receiver)
Power Consumption (emitter or receiver)
Output Type
Output Switching Capability
Test Input
Response Times
Immunity to Electrical Noise
ENVIRONMENTAL/PHYSICAL CHARACTERISTICS
Operating Temperature Range
Sealing
Housing Dimension
Material
*The DC version is featured with a galvanic insulation (DC to DC converter) that provides the same
level of immunity to external disturbances as AC versions; this is essential to guarantee the safety
integrity of the light curtain.
**Refer to the Unit Height Table for individual unit heights.
22 Honeywell • MICRO SWITCH Sensing and Control
FF-SB12 0 to 10 m (0 to 32.8 ft.) for -S2 version
0 to 6 m (0 to 19.7 ft.) for -S2F version and
FF-SB12E1R02E-S2
FF-SB14 0 to 10 m (0 to 32.8 ft.)
FF-SB30 0 to 6 m (0 to 19.7 ft.)
FF-SB15 3 to 24 m (9.84 to 78.8 ft.)
FF-SB12 22 mm (0.87 in.) minimum
FF-SB14 35 mm (1.38 in.) minimum
FF-SB15 235 mm (9.25 in.) minimum (body detection)
FF-SB30 30 mm (1.18 in.) minimum
± 2°
Infrared, pulsed, 880 nm
sunlight 20,000 lux
lamplight 15,000 lux
120/240 VAC (+10%,-20%), 48 to 62 Hz
24 to 48 VDC*, ± 15%,
8 VAC/8W DC
Mechanically-linked relay contacts
50 mA min., 2 Amps at 250 VAC
1 Amp at 48 VDC Max.
External dry contact required
≤ 29 msec
FF-SB12
≤ 30 msec
FF-SB14/FF-
SB30
FF-SB15 < 27 msec
IEC 1000-4-4 (Replaces IEC 801-4, Norm)
0 to 55°C (32 to 131°F)
NEMA 4, 13, and IP 65
FF-SB12/14/30 Width, 56 mm (2.2 in); Depth, 116 mm (4.6
in); Height**
Width, 56 mm (2.2 in); Depth, 116 mm (4.6
FF-SB15
in) Height 4 beam group, 1569 mm (61.77 in)
Height 3 beam group, 1169 mm (46.02 in)
Height 2 beam group, 769 mm (30.28 in)
Housing Aluminum Alloy
Front Plate Polycarbonate (FF-SB12, 14, 30)
Polymethylmethacrylate (PMMA) (FF-SB15)
FF-SB Series Installation Manual
For application help: call 1-800-537-6945