Product Specifications; Consumer Relations - Honeywell VERSA HEAT HHF260 Owner's Manual

PRODUCT SPECIFICATIONS

Model
Unit dims
Amps
Unit Voltage
Max Watts
Max BTUs
Operation Cost* To estimate the cost to operate this heater, multiply the watts used by 0.001 to convert
into kilowatts then multiply by your local kilowatt electric rate for however long you run the heater.
For example, if your electric rate is $0.1284** per kilowatt hour and you ran this heater in constant high mode
(1100 Watts) for 4 hours, it would cost you $0.56 cents to run the heater (1100 Watts x 4 hours x 0.001) x
0.1284kwp = $0.56 cents.
NOTE: Because the Low setting does not require as much electricity to operate, it is more energy efficient
and may be a better option if you are concerned about the higher power consumption when the heater is on
the High setting.
* Calculation (Total Wattage x .001 x hours used) x Cost per Kilowatt Hour = Cost to operate
** Average Retail Price of Electricity to Ultimate Customer by End-Use, US Energy Information Administration,
October 2019.

CONSUMER RELATIONS

Call us toll-free at: 1-800-477-0457
E-mail: ConsumerRelations@HelenofTroy.com
Or visit our website at:
www.HoneywellPluggedIn.com
Please be sure to specify a model number.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR
WARRANTY. DO NOT RETURN THE PRODUCT TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT
TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE
DAMAGE TO THE PRODUCT OR PERSONAL INJURY.
HHF260
5.4" L x 9.8" W x 11.3" H
9.17
120V, 60Hz
1100 Watts
3753
6