Honeywell SYA14 Series Manual page 294

Installation
Figure 2-9 Cable Extension Between Two Mats
(bayonet locking)
Safety mat A
A cable extension is used to connect two safety mats to the control unit. Using either the
connecting box or heat shrinkable sleeves will improve connector protection.
Figure 2-10 Cable Extension Single Mat
Safety mat
Cable extension used to connect a single safety mat to a control unit. Use either the
connecting box or heat shrinkable sleeves to improve the connector's protection.
All of the fiber optic connectors (including the two optoelectronic components inside the
control unit) are equipped with rubber caps. Place the caps on the connectors each time the
connectors are disconnected to avoid dust accumulation on the fiber optic cable end tips.
Figure 2-11 Fiber Optic Connector Protection
20 Honeywell • PK 107007-01 EN FR26 GLO 0298 Printed in France
connectors
Cable-to-cable
connector
FF-SM Series Installation Manual
Control unit
Safety mat B
Optical connector
End tip
For application help: see Warranty Information
Control unit
Caps