Physical Configuration And Wiring Diagram Examples - Honeywell SYA14 Series Manual

FF-SM Series Installation Manual

Physical Configuration and Wiring Diagram Examples

Refer to figures 3-7 through 3-11 for examples of interface drawings including the physical
configuration and wiring. Ensure the control units are located where they will be visible
to the operator and that the mat detects the presence of an individual on the sensing surface
(ANSI B11.19).
IMPROPER ACCESS GUARDING
When using safety mats, install additional hard guarding to protect the sides of the dangerous
machine area.
Failure to comply with these instructions could result in death or serious injury.
Figure 3-7 Physical Configuration - Area Controlled by Two Safety Mats Run by a
Single Control Unit
Detailed control unit
Mat 1 Mat 2
The wiring diagrams that follow depend on the number of control units connected to the
machine control circuitry, but are independent of the number of mat sensor(s) connected to
each control unit.
For application help: see Warranty Information
Control unit
SAFETY MAT
PLANCHER DE SECURITE
SICHERHEITS-SCHALTMATTE
TEST
Output status Machine operation disabled
Machine operation enabled
Etat de la sortie Marche de la machine autorisée Marche de la machine interdite
Ausgangsstatus Maschinenbetrieb-Freigabe Maschinenbetrieb gesperrt
+ Sensing threshold Normal
Call for Maintenance
Seuil de détection Normal Appeler la maintenance
Empfangspegel Normal Den Wartungsdienst anrufen
Test mode Normal operation Device in test condition
TEST Test Fonctionnement normal Appareil en test
Test Normalbetrieb Gerät im Tesbetrieb
-
Power on
Power supply Power off
Alimentation Hors tension Sous tension
Stromversorgung Ohne Spannung Unter Spannung
Light off Light on Flickering light
Lumière éteinte Lumière allumée Lumière clignotante
Licht aus Licht ein Blinkendes Licht
FF-SM
TYPE N
T (F) 38240 Meylan
S V
Response time
P F IP
S Imax/Vmax NEMA
EC type examination certificate delivered by INRS
Attestation d'examen CE de type délivrée par
Type 4 ESPE
EG Baumusterprüfbescheinigung von pr EN 954- 1
pr EN 1760
Honeywell • PK 107007-01 EN FR26 GLO 0298 Printed in France 41
Connections and Setup
!
Dangerous Machine Area
1
2