Honeywell SYA14 Series Manual page 706

Installation Instructions for the
FF-SRT
Time Delay Module
IMPROPER INSTALLATION
•
Consult with US and/or European safety agencies and
their requirements when designing a machine control,
interface and all control elements that affect safety.
•
Strictly adhere to all installation instructions.
Failure to comply with these instructions could result in
death or serious injury.
PRODUCT DESCRIPTION
The FF-SRT Time Delay module provides a time delay
before a safety interface circuit is opened safely.
If a two-channel version is used, the output contacts of the
two time delay circuits are connected in series. This device
has two safety relays with positive-guided contacts to
ensure redundancy.
When the displayed time has elapsed, the safety contacts
within the module open safely, even if one of the other
contacts is welded.
For example, this module may be used with an emergency
stop module. The emergency stop module will immediately
forward the emergency stop condition to the machine
control circuitry. The time delay module can be used to
keep some non-safety related machinery operating (door
locked) for a short period of time to avoid an unsafe
condition or simplify the machine startup cycle.
APPROVALS
CE The product, packaging and
documentation of FF-SR Series
products carry the CE mark; the CE
declaration of conformity is available
upon request.
PK107019-01-EN FR26 GLO 398 Printed in Germany
PK 107019-01
DIRECTIVES COMPLIANCE
Machine Directive 89/392 EEC
Low Voltage Directive 73/23 EEC
Electromagnetic Compatibility Directive 89/336
REGULATIONS COMPLIANCE
Regulation Title
OSHA 29 CFR General Requirements for
1910.212 (guarding of) All Machines
OSHA 29 CFR (Guarding of) Mechanical Power
1910.217 Presses
STANDARDS COMPLIANCE
Standard Title
ANSI B11.1 Mechanical Power Presses
ANSI B11.2 Hydraulic Power Presses
ANSI B11.19 Safeguarding when Referenced
by the Other B11 Machine Tool
Safety Standards
ANSI/RIA R15.06 Safety Requirements for
Industrial Robots and Robot
Systems
UL508 Underwriters Laboratories
EN 292 Safety of Machinery - Basic
Concepts, General Principles for
Design
EN 60204 Safety of Machinery - Electrical
Equipment of Machines
EN 954 Safety of Machinery - Safety
related parts of control system
0217359
Issue 1
1