Honeywell SYA14 Series Manual page 682

SPECIFICATIONS
Input
Nominal voltage
Nominal power consumption
Nominal frequency
Start time
Nominal voltage at S11
Minimum voltage at S11
Cable resistance between S11/S12
and S21/S22
Output
Contact complement
Response time
Contact type
Switching capability
Current range (min. to max.)
Voltage range (min. to max.)
Typical Electrical Life Espectancy
Typical Electrical Life Expectancy
Operating frequency
Fuse rating
Mechanical life
General
Temperature range
Housing material
Vibration resistance
Conductor connection
Conductor attachment
Mounting
NOTE 1: Install
suppression device across
load to avoid module contact
arcing and ensure specified
relay life expectancy.
NOTE 2: Total operations =
operations at power factor 1
multiplied by the limitation
factor. if the power factor is
0.5 at 230 vac,
(1,000,000 operations), the
limitation factor is
1,000,000 x 0.70 = 700,000
total operations.
CONTACT DAMAGE
To ensure the 1 mA capability during the lifetime of the contact, NEVER exceed 300 mA and 60 V.
Failure to comply with these instructions will result in product damage.
107017-11 EN FR26 GLO 0999 Printed in Germany
120 VAC (-15%, +10%), 230 VAC (-15%, +10%), 24 VDC (-10%, +20%)
Manual START function: 50 ms (-25%, +50%); Automatic START function: 1 s (-25%,
24 VDC with 35 mA current ±25% (provided by control module)
After opening of input (S11/12 or S21/22): 25 ms; Opening in supply circuit (L1(+)/A1): 50
3A
5A
10A
0.3
0.5
0.7
1.0
Sealing
1 x 4 mm² solid (max.) [12 AWG] ot 2 x 1.5 mm² (max.) [16 AWG] stranded wire with sleeve
Removable block temrinals with M3,5 screws; wire contacts are enclosed to prevent
Weight
arc FIG 1. CONTACT LIFE FOR
100% RESISTIVE
(typical)
(note 1)
power factor = 1 (cos ϕ)
3A
0.70.
24 VDC: 2 W; 230 VAC: 4 VA
50 to 60 Hz
21 VDC when activated
68 • (max.)
3 NO, 1 NC contacts
Safety relay, positive-guided
Power factor = 1 with resistive load
1 mA to 10 A (see caution)
0.1 to 250 VAC/DC
Power factor = 1 at 230 VAC/DC (note 1)
1,000,000 operations
500,000 operations
220,000 opeerations
Limitation factor (note 2)
0.45
0.70
0.85
1.00
600 switching cycles/h
6 A gL (max.)
Ten million switching operations
-15°C to +55°C (5°F to 131°F) at 90% humidity (max.)
Housing IP 40; Terminals IP 20
Thermoplastic
Amplitude 0.35 mm: Frequency 10 to 55 Hz
Quick install rail mounting EN 50022-35
450 g (0.99 lb.)
FIG 2. LIMITATION FACTOR
LOAD FOR INDUCTIVE LOADS
(note 2)
power factor < 1 (cos ϕ)
2