Honeywell SYA14 Series Manual page 424

Installation Instructions for the
Safety Deadbolt Actuator
IMPROPER INSTALLATION
• Consult with local safety agencies and their
requirements when designing a machine-control
link, interface and all control elements that affect
safety.
• Strictly adhere to all installation instructions,
including those for the GK or GKR/GKL Key
Operated Safety Interlock Switch being used.
Failure to comply with these instructions could
result in death or serious injury.
Step 1: Mount the Safety Deadbolt Actuator using the four mounting holes on the side or the four tapped
mounting holes on the bottom of the device.
For reference only (mm/in)
GK SERIES
OPERATING HEAD
15,8 APPROXIMATE
(0.62)
SAFETY
DEADBOLT
ACTUATOR
KEY ENGAGEMENT DETAIL
Sensing and Control
GENERAL INFORMATION
The Safety Deadbolt Actuator is used with the GK
and GKR/GKL Key Operated Safety Interlock
Switches to prevent the actuator key from being
used as a doorstop or from protruding into the
space of the protective guard or access door.
Padlock holes allow up to three user-provided
padlocks for the purpose of GK Series actuator key
lockout.
8,5
(0.33)
37,2
(1.46)
27,0
6,3
(1.06)
(0.25)
14,0
(0.55)
41,8
(1.65)
20,1
(0.79)
PK 80141
65,5 28,4
(2.58) (1.12)
5,3
(0.21)
5,6
(0.22)
115,1
(4.53)
140,0
(5.51)
4X M6 X1 THREAD
6,0 (0.24)
100,1
(3.94)
ISSUE 1
2X 15,0
(0.59)
8,5
(0.34)
45,1
(1.77)
31,5
(1.24)
36,8
26,0
(1.45)
(1.02)
12,4
(0.49)
20,1
(0.79)