Honeywell SYA14 Series Manual page 283

Overview
This section contains safety mat information related to machine guarding, point-of-operation
guarding, safety distance, connection considerations, configuration considerations and
mounting dimensions. A complete FF-SM Series safety mat system includes a mat, a control
unit, and some accessories such as cable extensions, connecting boxes and edge trim.
• FULL REVOLUTION MECHANICAL POWER PRESSES CANNOT BE STOPPED IN MID-
STROKE (OSHA 29CFR 1910.217).
• Do NOT use FF-SM Series safety mats on full revolution mechanical power presses.
Failure to comply with these instructions will result in death or serious injury.
IMPROPER USE OF THE FF-SM SERIES SAFETY MAT
• The 30 kg sensitivity of the FF-SM Series safety mats is suitable for the detection of adults weighing
more than 35 kg according to the EN1760-1 European standard.
• Do NOT use FF-SM Series safety mats in public places where children may have to be detected.
• Use of an additional protective sheet laid on the safety mat (sensor) surface is forbidden since it may
alter the 30 kg sensitivity.
Failure to comply with these instructions will result in death or serious injury.
IMPROPER INSTALLATION
• Install FF-SM safety mats in accordance with this installation manual and applicable local safety
regulations and standards (OSHA, ANSI, European standards).
• Allow entry into protected area by activation of sensing zone or other safeguarding device only.
Failure to comply with these instructions could result in death or serious injury.
IMPROPER SYSTEM PERFORMANCE
• Comply with local safety requirements when designing machine control circuitry and all control
elements that affect safety.
• Use two independent stop circuit safety relays with mechanically linked contacts to reliably detect a
welded contact.
• Install two independent safety relay contacts into machine control stop circuit monitored by machine
control circuitry.
Failure to comply with these instructions could result in death or serious injury.
IMPROPER MACHINE REACTION
• Ensure the machine control is capable of stopping the machine at any point in the cycle.
• Ensure that a loss of power does NOT impair stopping action of the machine.
Failure to comply with these instructions could result in death or serious injury.
For application help: see Warranty Information
Installation
Honeywell • PK 107007-01 EN FR26 GLO 0298 Printed in France 9