Mirrors - Honeywell SYA14 Series Manual

Description and Operation

Mirrors

Refer to table 1-2 for multi-beam beam height information. Each mirror will reduce the overall
scanning range by 10 percent (25% for FF-SPS11MIR and FF-MSK1). See figure 1-8 to
check the value of each mirror.
Table 1-2 Multi-beams, Beam Height
Number of Beams
2
3
4
The deep groove on the top of each device is used for alignment. Emitter alignment must be
precise, especially when using mirrors. Always align the emitter with a mirror first, then align
the receiver.
10 Honeywell • MICRO SWITCH Sensing and Control
Height Above Floor mm (in)
400 (15.7)
900 (35.4)
300 (11.8)
700 (27.6)
1100 (43.3)
300 (11.8)
600 (23.6)
900 (35.4)
1200 (47.2)
FF-SPS4 Series Installation Manual
For application help: call 1-800-537-6945