Honeywell SYA14 Series Manual page 631

Installation Instructions for the
FF-SR05936
Standstill Monitor Module
IMPROPER INSTALLATION
•
Consult with US and/or European safety agencies and
their requirements when designing a machine control,
interface and all control elements that affect safety.
•
Strictly adhere to all installation instructions.
Failure to comply with these instructions could result in
death or serious injury.
PRODUCT DESCRIPTION
If the stopping time of the machinery is unpredictable, use
the FF-SR05936 Standstill Monitor.
This module measures (between Z1/Z2) the back EMF of
the disconnected motor from the terminals of one stator
winding. When the EMF has decreased to a near zero
value, the FF-SR05936 detects that the motor has stopped
and energizes its output relays. In addition, FF-SR05936
monitors the connections to the motor for broken wires on
terminals Z1, Z2. If an open (line break) is detected, the
output relay contacts latch in the de-energized position as if
the motor was running. After the break has been repaired,
the module is reset by removing power to the module
momentarily.
APPROVALS
CE The product, packaging and
documentation of FF-SR Series
products carry the CE mark; the CE
declaration of conformity is available
upon request.
PK 107010-01-EN FR26 GLO 398 Printed in Germany
PK 107010-01
DIRECTIVES COMPLIANCE
Machine Directive 89/392 EEC
Low Voltage Directive 73/23 EEC
Electromagnetic Compatibility Directive 89/336
REGULATIONS COMPLIANCE
Regulation Title
OSHA 29 CFR General Requirements for
1910.212 (guarding of) All Machines
OSHA 29 CFR (Guarding of) Mechanical Power
1910.217 Presses
STANDARDS COMPLIANCE
Standard Title
ANSI B11.1 Mechanical Power Presses
ANSI B11.2 Hydraulic Power Presses
ANSI B11.19 Safeguarding when Referenced
by the Other B11 Machine Tool
Safety Standards
ANSI/RIA R15.06 Safety Requirements for
Industrial Robots and Robot
Systems
UL508 Underwriters Laboratories
EN 292 Safety of Machinery - Basic
Concepts, General Principles for
Design
EN 60204 Safety of Machinery - Electrical
Equipment of Machines
EN 954 Safety of Machinery - Safety
related parts of control system
0217353
ISSUE 1
1