Indicator Status And Corrective Actions - Honeywell SYA14 Series Manual

Inspection and Maintenance

Indicator Status and Corrective Actions

Indicators status
Off
54 Honeywell • PK 107007-01 EN FR26 GLO 0298 Printed in France
On Flickering
TEST
TEST
TEST
TEST
TEST
TEST
FF-SM Series Installation Manual
Causes Corrective actions
Ensure connection to the main
NO power is applied power supply is secure ;
to the equipment. ensure power supply fues are
not blown; change fuse as
required (see Fuse Replacement).
Check the quality of the connec-
Equipment is in
tion made on the test input
test mode.
(see Connections and Setup).
Equipment operates
correctly, but signal
drift is detected.
Ensure there are no objects on
the mat;
ensure the fiber optic cable and
ST optical connectors are in good
Equipment is in an
conditions;
alarm condition.
adjust the detection threshold;
if the equipment remains in an
alarm condition, perform a
diagnostic failure check.
Equipment is in an
alarm condition.
Equipment operates None, equipment is operating
correctly and no object correctly.
is detected.
For application help: see Warranty Information