Honeywell SYA14 Series Manual page 639

IMPROPER INSTALLATION
• Consult with US and/or European safety agencies and
their requirements when designing a machine control,
interface and all control elements that affect safety.
• Strictly adhere to all installation instructions.
Failure to comply with these instructions could result
in death or serious injury.
PRODUCT DESCRIPTION
Two-hand safety controls ensure protection against hand
injury due to dangerous machine movement. A two-hand
safety control system is made up of two elements: a control
board and a safety control module. The control board has
two control devices that force the use of two-hand
activation simultaneously. The safety control element is a
device like the FF-SR25980 two-hand safety module. This
control module is linked to the control board and is located
in an enclosure.
This device has two safety relays with positive-guided
contacts to ensure redundancy. This safety control module
provides an emergency stop signal to the machine control
circuitry when the two-hand safety device inputs are
removed or released. FF-SR25980 helps to create a
control reliable safety solution by providing redundancy and
self-checking circuitry. Other features include high current
capability, external relay monitoring and input closure
timing.
APPROVALS
CE The product, packaging and
documentation of FF-SR Series
products carry the CE mark; the CE
declaration of conformity is available
upon request.
cULus This product is pending approval by
(pending) Underwriters Laboratories Inc.
according to Canadian and U.S.
safety requirements.
BG German Berufsgenossenschaft
E+MIII
107011-10 EN FR26 GLO 0499 Printed in Germany
FF-SR25980
Two-hand Safety Module
Installation Instructions
(pending)
DIRECTIVES COMPLIANCE
Machine Directive 89/392 EEC
Low Voltage Directive 73/23 EEC
Electromagnetic Compatibility Directive 89/336
REGULATIONS COMPLIANCE
Regulation Title
OSHA 29 General Requirements for
CFR (guarding of) All Machines
1910.212
OSHA 29 (Guarding of) Mechanical Power
CFR Presses
1910.217
STANDARDS COMPLIANCE
Standard Title
ANSI B11.1 Mechanical Power Presses
ANSI B11.2 Hydraulic Power Presses
ANSI B11.19 Safeguarding when Referenced
by the Other B11 Machine Tool
Safety Standards
ANSI/RIA Safety Requirements for
R15.06 Industrial Robots and Robot
Systems
UL508 Underwriters Laboratories
EN 292 Safety of Machinery - Basic
Concepts, General Principles for
Design
EN 60204 Safety of Machinery - Electrical
Equipment of Machines
EN 954 Safety of Machinery - Safety
related parts of control system
prEN 574 Two-hand control devices
1