Honeywell SYA14 Series Manual page 656

SPECIFICATIONS
Input
Nominal voltage
Nominal consumption
Nominal frequency
Output
Response time
Switching Capability
Current Range (min. to max.)
Voltage Range (min. to max.)
Typical Electrical Life Expectancy
Typical Power Factor (cos ϕ)
Operating frequency
Mechanical life
General
Temperature range
Housing material
Vibration resistance
Wire connection
Wire attachment
NOTE 1:
Install
suppression device across load
to avoid module contact arcing
and ensure specified relay life
expectancy.
NOTE 2:
Total operations =
operations at power factor 1
multiplied by the limitation
factor. if the power factor is 0.5
at 230 vac, 3A (1,000,000
operations), the limitation factor
is 0.70. 1,000,000 x 0.70 =
700,000 total operations.
2
120 (-15%, +10%), 230 VAC (-20%, +10%), 24 VDC (-10%, +20%)
Contacts
Contact type
3A
5A
10A
0.3
0.5
0.7
1.0
Fuse rating
Sealing
2 x 2,5 mm
Removable terminal strip; flat terminals with self-lifting wire clamp; DIN 46206
Mounting
Weight
FIG 1. CONTACT LIFE FOR 100%
arc
RESISTIVE LOAD (typical) (note 1)
power factor = 1 (cos ϕ)
24 VDC: 2.8 W; 230 VAC: 5 VA
50 to 60 Hz
7 NO, 1 NC contacts
Safety relay, positive-guided
15 ms
Power factor = 1 with resistive load
10 mA to 10A (see caution)
0.1 to 250 VAC/DC
Power factor = 1 at 230 VAC/DC (note 1)
1,000,000 operations
500,000 operations
220,000 operations
Limitation Factor (note 2)
0.45
0.70
0.85
1.00
6000 operating cycles/h
10 A gL (max.)
Ten million operating cycles
-15°C to + 55°C (5°F to 131°F) at 90% humidity (max.)
Housing IP 40; Terminals IP 20
Thermoplastic
Amplitude 0.35 mm; Frequency 10 to 55 Hz
2
[14 AWG] solid or 2 x 1.5 mm
and
Quick install rail mounting EN 50022-35
510 g (1.12 lb.)
FIG 2. LIMITATION FACTOR FOR
INDUCTIVE LOADS (note 2)
power factor < 1 (cos ϕ)
107014-10 EN FR26 GLO 0499 Printed in Germany
2
[16 AWG] stranded wire with sleeve