Honeywell SYA14 Series Manual page 615

IMPROPER CONNECTION OF LOAD
For safety reasons, the loads must be connected connected between terminals 2-8 and
between terminals 2-25 .
Failure to comply with these instructions could result in death or serious injury.
MANUAL RESTART
• The restart contact can be provided by the press cycle start command.
• The effective restart of the module is achieved 30 ms after the push-button is
released, and after a short pulse (between 0.1s and 1s) is sent on the
appropriate input of the module.
Muting of a safety light curtain on a hydraulic press (using 4 sensors)
IMPROPER INSTALLATION
For sensors installation, strictly adhere to instructions given in chapter 3.2.2 Use in
the press mode.
Failure to comply with these instructions could result in death or
serious injury.
107004-15 EN FR26 ROW 0899 Printed in France 81