Honeywell SYA14 Series Manual page 43

3.8.2 Mounting Accessory Set
The mounting accessory set contains the following hardware:
Mounting Hardware
M4 T-shape bolts
HM4 nuts
M4 Rip-lock washers
M6 Rip-lock washers
LIGHT CURTAIN/MOUNTING HARDWARE DAMAGE
•
Carefully install mounting hardware (especially washers) to ensure correct orientation
and installation.
•
Use the provided M4 Rip-lock washers to install brackets on the light curtain only.
Never use fan type lockwashers. The torque strength of the provided HM4 nuts must
be lower than 1.6 N.m .
•
Use the provided M6 Rip-lock washers to install brackets on the machine only. Never
use fan type lockwashers. The torque strength of the HM6 nuts (not provided) must
be greater than 2.5 N.m .
Failure to comply with these instructions may result in product damage.
Figure 3-19 Mounting brackets assembly (right-angle and straight brackets)
HM6 Nut (torque
strength > 2.5 N.m)
(not provided)
M6 Rip-lock washer
HM4 Nut (torque
strength > 1.6 N.m)
M4 Rip-lock washer
M4 t-shape bolt
Bracket
Safety Light Curtain
107031-23 EN FR26 GLO 1199 Printed in France
Quantity
3
3
3
6
HM4 Nut (torque
strength > 1.6 N.m)
M4 Rip-lock washer
Machine Frame
M4 t-shape bolt
Bracket
M6 Rip-lock washer
HM6 Nut (torque
Safety Light Curtain
strength > 2.5 N.m)
(not provided)
43