Honeywell SYA14 Series Manual page 59

Figure 4-10 Wiring diagram using the FF-SRM muting module
(1) : 31 Vdc varistors NO P/B : cycle-start push button (Normally Open contact)
qqqqq qqqqq
(*) : use pin 3 for the FF-SYA Q2E emitter and pin 7 for the FF-SYA Q2R receiver.
Refer to the FF-SRM muting module installation manual for detailed information on wiring.
Failure to comply with these instructions could result in death or serious injury.
IMPROPER CONNECTION OF LOAD
For safety reasons, the loads must be connected connected between terminals 4-6 and
between terminals 5-6 .
Failure to comply with these instructions could result in death or serious injury.
107031-23 EN FR26 GLO 1199 Printed in France 59