1. Important information
Thank you for purchasing this Honeywell safety product. The FF-SE laser scanner is an electrosensitive
protective equipment (ESPE) designed to detect an intruder inside a dangerous zone. This permanent self-
checking device meets the highest standards of control reliability.
General
•
The FF-SE has been tested by the BIA (Berufsgenossenschaftliches Institut für Arbeitssicherheit, or "Trade
Association Institute for Workplace Safety") according to the Machinery Directive 98/37/EEC.
•
The FF-SE satisfies requirement for a category 3 product as according to the EN 954-1.
The correct operation of the FF-SE depends on the correct definition of the alarm and safety zones.
The installation of the FF-SE, the definition and programming of the protection areas as well as the integration
into the machine control must be carried out by an authorised person, who knows and applies the safety
regulations.
After finishing the programming and downloading the data to the FF-SE, the protection areas must be checked
while the machine is switched off.
•
Honeywell observes the QA System ISO 9001 (certified by AFAQ) during design, development and
production.
•
Recycling :
The product must be recycled according to the regulations in force in your country. Honeywell is ready to do this.
A fee will be charged according to our general conditions
1.1 Overview
This manual contains description, operation, installation, electrical connections, maintenance and troubleshooting
information related to the FF-SE Series safety laser scanner.
1.2 Organisation of Installation Manual
This installation manual has the following sections:
•
Important Information
•
Statutory Provisions
•
Description and Operation
•
Installation and Mounting
•
Electrical Connections
•
Maintenance and Trouble Shooting
•
Order Guide
•
Warranty Information
•
Appendix
107006-11 EN FR26 GLO 0300 Printed in Germany
6