Name And Description Of Main Circuit Terminals; Applicable Receptacles; 1Cn Connector For I/O Signals; 2Cn Connector For Encoder - YASKAWA SGM Series User Manual

4.2 Name and Description of Main Circuit Terminals

Terminal Signal
Main circuit power supply input
R, S, T
terminal
U, V, W Motor terminal
Control power supply input
r , t
terminal
Ground terminal
×2
Regenerative resistor unit
P, B
terminal
Regenerative resistor unit
P1, B
terminal
N Main circuit negative terminal
Note SERVOPACKS with 5 kW or less capacity do not have a P1 terminal.

4.3 Applicable Receptacles

4.3.1 1CN Connector for I/O Signals

Specifications for p
SERVOPACK C SERVOPACK Connector
10226-52A2JL
(Product of SUMITOMO 3M Co.,
Ltd.), 26 pin right angle

4.3.2 2CN Connector for Encoder

Specifications for
SERVOPACK SERVOPACK
Connector
10220-52A2JL (Product of 10120-3000VE
SUMITOMO 3M Co.,Ltd.),
20 pin right angle
Note This cable is available from Yaskawa. Refer to 9.3 "Cables" for more details on cables.
Table 4.1 Name and Description of Main Circuit Terminals
Name
Three-phase 200 to 230 VAC
Connects to the Servomotor.
Single-phase 200 to 230 VAC
Connects to ground (for grounding the power supply and Servomotor).
SERVOPACK with 5 kW or less capacity (external connection is usually not
needed.)
SERVOPACKS with 6 kW or higher capacity
External connection is usually not needed.
Table 4.2 Specifications for Applicable SERVOPACK I/O Signal Receptacles
Solder
10126-3000VE
Table 4.3 Applicable Receptacle and Cable Specifications
Applicable Receptacle Model
Solder Case
10320-52A0-008
4 -7
4.2 Name and Description of Main Circuit Terminals
Description
+10
%, 50/60 Hz
-15
+10
%, 50/60 Hz
-15
Applicable Receptacle Model
Case
10326-52A0-008
Manufacturer
SUMITOMO 3M Co.,
Ltd.
Manufacturer
SUMITOMO 3M Co., Ltd.
Cable Specifications
(see note) (see note)
See 9.3 "Cables".
4