YASKAWA SGM Series User Manual page 135

User Constants
7.3.1 Cn-0001: Memory Switches 1
7.3 Memory Switch Bit Details
7.3.1 Cn-0001: Memory Switches 1
Bit
b0
b1
b2
b3
b4
b5
b6
7
b7
The following describes each bit of memory switch (bit-type user constant).
J Bits b0 to b7
The following table shows details of bits b0 to b7.
SV_ON command mask
0: Enable SV_ON/SV_OFF command.
1: Always send SV_ON command (Servo ON)
SENS_ON command mask
0: Enable SENS_ON/SENS_OFF command
1: Always send SENS_ON command (Encoder power ON)
P-OT mask
0: Enable the P-OT signal.
1: Mask (always disable) P-OT signal
N-OT mask
0: Enable N-OT signal.
1: Mask (always disable) N-OT signal
−
−
Stopping method for base block
0: Dynamic brake (DB) stop
1: Coasting to a stop
Operation after dynamic brake stop
0: Release dynamic brake.
1: Do not release dynamic brake.
Note Never change the factory setting of the bit marked with "−".
Cn-0001
Bit
Description
7 -16
Factory Setting
0
0
0
0
0
0
0
1