Fujitsu MB90895 Series Hardware Manual page 24

CHAPTER 1 OVERVIEW
Table 1.2-2 CPU and peripheral functions of MB90895 series (2/2)
8/10-bit A/D converter
UART0 (SCI)
UART1 (SCI)
CAN
*:
MB90F897S
6
MB90V495G
Channel count: 8
Resolution: 10 or 8 bits
Conversion time: 6.125 µs (including sampling time at 16-MHz machine clock frequency)
Two or more continuous channels can be converted sequentially (up to 8 channels)
Single conversion mode: Selected channel converted once only
Continuous conversion mode: Selected channel converted continuously
Stop conversion mode: Selected channel converted and temporary stopped alternately
Channel count: 1
Clock synchronous transfer: 62.5 K bps to 2 M bps
Clock asynchronous transfer: 1,202 bps to 62,500 K bps
Two-way serial communication function, master/slave-connected communication
Channel count: 1
Clock synchronous transfer: 62.5 K bps to 2 M bps
Clock asynchronous transfer: 9,615 bps to 500 K bps
Two-way serial communication function, master/slave-connected communication
Conforms to CAN Specification Ver.2.0A and Ver.2.0B
Transmit/receive message buffer: 8
Transfer bit rate: 10 K bps to 1 M bps (at 16-MHz machine clock)
CAN wake-up
MB90F897/S