Fujitsu MB90895 Series Hardware Manual page 79

:Available
:Not available
:Interrupt factor corresponds to EI
: Interrupt factor can be used when not using interrupt sources sharing ICR register
*1:
• The interrupt level for resources sharing an ICR register become the same.
• When two resources share an ICR register, only one can use the EI
• When two resources share an ICR register and one specifies the EI
interrupt.
*2:Only input capture unit 1 supports EI
disabled for interrupts when input capture unit 1 uses EI
*3:Only CAN wake-up supports EI
disabled for interrupts when CAN wake-up uses EI
*4:The priority is given when plural interrupts with the same level are generated simultaneously.
2 2
OS and has EI OS stop function
2
OS. As the PPG timer does not support EI
2
OS.
2
OS. As the timebase timer does not support EI
2
OS.
CHAPTER 3 CPU
2
OS.
2
OS, the remaining resource cannot use the
2
OS, the PPG timer should be
2
OS, the timebase timer should be
61